beautypg.com

Specifications, Important safety information (continued), Electrical ratings model designation – Antunes, AJ 9300584 User Manual

Page 5

background image

EGG STATION (ES-600 & ES-1200)

5

P/N 1010871 Rev. D 08/05

SPECIFICATIONS

CAUTION

All electrical connections must be in accordance
with local electrical codes and any other appli-
cable codes.

Electrical Ratings

Model Designation

TYPE OF POWER CORD
H = Harmonized

TYPE OF PLUG
C = CEE 7/7
G = BS-1365 Fused/Permaplug
I = International Pin & Sleeve

ES-600XX or

ES-1200XX

Electrical Cord & Plug Configurations

* Used in Model Designation

Letter

Code*

Description

Configuration

(H)C

CEE 7/7, 16

Amp., 250 VAC

(Assembly Only).

(H)G

BS-1365 - Fused,

Permaplug

16 Amp, 250 VAC

(Assembly Only)

(H)I

IEC-309, 16 Amp.,

250 VAC., Pin &

Sleeve (Assembly

Only).

AS3112 15

Amp., Australia

(Harmonized Cord)

Image Not Avaliable

L

Model

Number

Mfg.

Number

Volts

Watts

Amp

Hertz

ES-600HI

9300570

230

2900

12.6

50/60

ES-600HC

9300572

230

2900

12.6

50/60

ES-600

9300576

230

2900

12.6

50/60

ES-1200HI

9300580

230

2900

12.6

50/60

ES-1200HC

9300582

230

2900

12.6

50/60

ES-1200HG

9300584

230

2900

12.6

50/60

ES-1200

9300586

230

290

12.6

50/60

The following tips are recommended for main-

tenance of your stainless steel equipment,

- Always use soft, damp cloth for cleaning,

rinse with clear water and wipe dry. When
required, always rub in direction of metal
polish lines.

- Routine cleaning should be done daily

using soap, ammonia detergent and water.

- Stains and spots should be sponged using

a vinegar solution as required.

- Finger marks and smears should be

rubbed off using soap and water.

- Hard water spots should be sponged using

a vinegar solution.

IMPORTANT SAFETY INFORMATION (continued)

WARNING

ELECTRICAL SHOCK HAZARD. FAILURE TO

FOLLOW THE INSTRUCTIONS IN THIS MANUAL

COULD RESULT IN SERIOUS INJURY OR DEATH.

• Electrical ground is required on this appliance.

• Do not modify the power supply cord plug. If

it does not fit the outlet, have a proper outlet
installed by a qualified electrician.

• Do not use an extension cord with this appli-

ance.

• Check with a qualified electrician if you are in

doubt as to whether the appliance is properly
grounded.

This manual is related to the following products: