Panasonic HX-WA03W - Manual (Page 63)

- 63 -
Select the menu.
Please refer to page 39 .
Opening the LCD monitor will switch from Standby Mode to Recording
Standby Status in approximately 0.5 seconds (in Recording Mode only).
≥ When in Quick Start Standby Mode about 50% of the power used
in recording standby mode is being consumed, so the recording
time will be reduced.
≥ Set to Recording Mode. ( l 38 )
1 Select [QUICK START] with the SET button and press the SET
button.
2 Select [ON] with the SET button and
press the SET button.
3 Close the LCD monitor.
The status indicator A flashes green and the
unit goes into Quick Start standby mode.
≥ Pressing the power button B for a short time will also set the status to
Quick Start Standby Mode.
Basic
Using the Option Menu
[MENU]: , or # desired setting
OPTION MENU 1
[CLOCK SET]
[QUICK START]
1 2 3
1

