Panasonic FV-07VFH3 - Manual (Page 12)

MAINTENANCE (CLEANING)
③ Install the assembly again filter mesh (Fig.32).
② Remove the . And vacuum-clean, wash
and dry
filter mesh
(Fig.31).
Fig.31
Fig.32
Model No. Air direction
Voltage
(V) Frequency
(Hz)
Power consumption (W) Air deliver Noise
Heat Vent
Vent (0.1" WG)
(cfm) Vent
(sone)
Weight
Ib.(kg)
FV-07VFH3
Exhaust &
Circulation
Specifications of Vent are based on HVI standard.
Dryer-hood type vent with
backdraft flap (s).
Caulk termination to duct.
2-3 ft straight run before elbow.
In attic installation,
caulk box to drywall.
Short piece of flexible duct
helps alignment and absorbs
sound. Use clamps plus tape
at all flex joints.
Insulation
Foil tape tightly covers all metal
dust joints (glue PVC joints).
PRACTICAL GUIDE TO INSTALLATION
Properly insulate the area around
the fan to minimize building heat
loss and gain. 3) (Fig.
Loose fill or batt insulation can be
placed directly over the fan housing
in the attic.
3
SPECIFICATIONS
120 60 26 70 1.5 3.6
PRODUCT SERVICE
Warning Concerning Removal of Covers.
The unit should be serviced by qualified technicians only.
Your product is designed and manufactured to ensure a minimum of maintenance.
Should your unit require service or parts,call panasonic Call Center at 1-866-292-7292 (USA)
or 1-800-669-5165 (Canada).
X0113-0 07VFH34200
1346(25 C)
Fig.33