Sony FIU-710 - Manual (Page 12)

Page 12 Training Your Puppy® Unit
4. Select the Authentication Methods tab and
click the Add button. The Add Authentication
Device dialog appears.
5. Select your FIU-710 fingerprint device
from the Available Methods and Devices list.
Note that the number in parentheses
should match the serial number on the
bottom of your unit. Click OK.
6. When the Fingerprint Enrollment Wizard
appears, click Next. Select a fingerprint to
enroll by clicking its image with your
mouse, and click Next.
7. Scan your fingerprint four times (the
default number). The first three times
enroll your fingerprint, and the fourth
verifies that the fingerprints sufficiently
match for later use in the verification
process. Click Next.