Ameriphone DIALOGUE XL 50 - Manual (Page 7)

Setting up Your
Dialogue XL-50 (continued)
Desktop Use
1. Connect the telephone line cord
and the handset cord to the
telephone as shown in Figure 4.
2. Plug the AC adapter into an
electric outlet and into the tele-
phone as shown in Figure 4.
3. Lift the handset and listen for a
dial tone.
The phone is ready to use.
Wall Mount
1. Pull the handset hook out as
shown in Figure 5 and reverse
its position so that the hook
points up and will hold the
handset when you hang up.
2. Insert the tabs of the phone
base into the slots in the lower
position of the base as shown
in Figure 6. Push the phone
base in and down firmly until it
snaps into place.
3. Plug in the short phone line
cord and mount the phone as
shown in Figure 7.
4. See Desktop Use section and
follow steps 1 through 3.
M 1 M 2
M 5 M 6 M 7 M 8 M 9 M 10 M 11
M 3 M 4
Figure 4 - Connecting the Components
MANUAL
AUTO
Figure 6 - Phone Base for Wall
Mounting
Figure 5 - Reversing the Hook
Figure 7 - Wall mounting installation
5
MANU AL
AUTO