Sony PCV-E518DS User Manual
Page 636
7. Replace the left-side panel as described in
.
Adding Memory
In order to increase your computer's memory, you may need to remove one of the
factory-installed DIMMs and replace it with one of greater capacity. For details, see the VAIO Digital
Studio Computer Reference Manual, which is available at Sony's Web site at
.
For memory upgrades, use only 3.3V unbuffered 4-clock 64-bit 66 MHz SDRAM DIMM module
Rev1.0 or 3.3V unbuffered 4-clock 72-bit 66 MHz SDRAM DIMM module Rev1.0. For more
information on Digital Studio Computer compatible memory, call Sony at 1-888-4SONYPC
(1-888-476-6972).
To install memory
Make sure you observe the proper safety precautions when you add DIMMs to your Sony computer. See
1. Shut down your computer and turn off all peripheral devices, such as your printer, display, and
speakers.
2. Unplug your computer and any peripheral devices.
3. Remove the left-side panel, bottom panel, and front panel, as described in
. Then detach the diskette drive, as described in
.
Page 636