ATEN CL-1208 - Manual (Page 61)

5. After you have made your device selection(s), Click Next to perform the
upgrade.
If you enabled Check Firmware Version, the Utility compares the
device’s firmware level with that of the upgrade files. If it finds that the
device’s version is higher than the upgrade version, it brings up a dialog
box informing you of the situation and gives you the option to Continue
or Cancel.
If you didn’t enable Check Firmware Version, the Utility installs the
upgrade files without checking whether they are a higher level, or not.
As the Upgrade proceeds status messages appear in the Status Messages
panel, and the progress toward completion is shown on the Progress bar.
2005-04-26
The Firmware Upgrade Utility
53