ATEN CL-1208 - Manual (Page 55)

Hotkey Summary Table
[Num Lock] + [-] [Port ID] [Enter] Switches access to the computer that
corresponds to that Port ID.
[T] [n] [Enter] Sets the Auto Scan interval to n seconds -
where n is a number from 1 - 255.
[A] Invokes Auto Scan Mode.
When Auto Scan Mode is in effect, [P] or Left
Click pauses Auto Scanning.
When Auto Scanning is paused, pressing
Any Key or another Left Click resumes Auto
Scanning.
[ ← ] Invokes Skip Mode and Skips from the
current port to the first accessible port
previous to it.
[ → ] Invokes Skip Mode and Skips from the
current port to the next accessible port.
[ ↑ ] Invokes Skip Mode and Skips from the
current port to the last accessible port of the
previous Station. If you are at a port on the
First Station you cycle backward to the last
accessible port on the Last Station.
[ ↓ ] Invokes Skip Mode and Skips from the
current port to the first accessible port of the
next Station. If you are at a port on the Last
Station you cycle forward to the first
accessible port on the First station.
[B] Toggles the Beeper On or Off.
2005-04-26
Hotkey Operation
47