beautypg.com

Sony VGP-MR100U User Manual

Page 29

background image

VGP-MR100QSG(GB)_2-580-488-11(1)

29

5

Use the

V/v buttons to select “System Settings” , and press the

SELECT button.

The “System Settings” screen appears.

System Settings

TV Type

Network Settings

Playback Preference

Firmware Update
Default Settings
System Information

Language Settings

SELECT

:Select

RETURN

:Return

6

Use the

V/v buttons to select “Network Settings”, and press the

SELECT button.

The “Network Settings” screen appears.

7

Change the IP address allocation method and specify the IP address if
necessary.

1

Use the

V/v buttons to select “IP Address”, and press the SELECT button.

The “IP Address” screen appears.

2

Use the

V/v buttons to select the setting that matches your network

environment, and press the SELECT button.
If the environment includes a router: select “Obtain an IP address
automatically (using router)”.
If the environment does not include a router: select “Obtain an IP address
automatically (not using router)”.

3

If you have selected “Specify an IP address”, use the

V/v/B/b buttons to select

“OK”, and press the SELECT button. Then use the number buttons to enter the
IP address and subnet mask, and press the SELECT button.

4

Use the

V/v/B/b buttons to select “OK”, and press the SELECT button.

When the message about restarting the Network Media Receiver appears,
select “OK” and press the SELECT button. The Network Media Receiver
restarts and enters Standby mode.

z

Hint

If you have selected “Obtain an IP address automatically”, the assigned IP address will be displayed when
you access the “IP Address” screen after the Network Media Receiver has restarted.