Sony VGP-MR100U - Manual (Page 28)

VGP-MR100QSG(GB)_2-580-488-11(1)
28
6 Change the settings of the Network Media
Receiver to match the network connection
The factory default setting of the Network Media Receiver is “Obtain an IP address automatically
(using router)”. Depending on your system environment, this setting may have to be changed.
If a router is being used, there is no need to change the setting.
Use the screens displayed on your TV to configure the network setting.
Refer to the Operating Instructions (included on the supplied CD-ROM) for the location of buttons
on the remote control and for remote control operations.
1
Press the TV POWER button on the remote control to turn on the TV
set.
2
Use the TV/VIDEO button on the remote control to set the TV to
display the signal from the input to which the Network Media Receiver
is connected.
3
Press the Network Media Receiver POWER button to turn the Network
Media Receiver on.
The standby indicator changes to green, and the “Select a server...” screen appears
on the TV.
Select a server•••
SELECT :Select :System Settings OPTIONS
4
Press the OPTIONS button on the remote control.
The OPTIONS menu appears.