Sony KDL-26M4000 User Manual
Page 41
41
O
th
e
r Info
rm
a
tio
n
Certain programs on DVD or
other digital sources display a
loss of detail, especially during
fast-motion or dark scenes.
❑ The compression used by certain digital broadcasts and DVDs may cause
your TV’s screen to display less detail than usual, or cause artifacts (small
blocks or dots, pixelations) to appear on your screen. This is due to your
TV’s large screen and ability to show very fine detail, and is normal for
certain digitally recorded programs.
Remote control does not
operate.
❑ Check the polarity of the batteries or replace the batteries.
❑ Point the remote control at the remote control sensor of the TV.
❑ Fluorescent lamps can interfere with your remote control operation; try
turning off the fluorescent lamps.
❑ Keep the remote control sensor area clear from obstacles.
Some digital cable channels are
not being displayed.
❑ Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
❑ The digital cable channel may be set to Hidden in the Show/Hide
Channels setting (see page 33).
Lost password.
❑ Select the Parental Lock menu, then enter the following master
password: 4357. The master password clears your previous password and
allows you to enter a new password (page 34).
How to reset the TV to factory
settings.
❑ Turn on the TV. While holding down V on the remote control, press
POWER on the TV. Release the
V button.
WARNING: Parental Lock password may be required if it has been created.
The reset will clear all of your customized settings.
Condition
Explanation/Solution