American Standard 2076 - Manual

SAVE FOR FUTURE USE
7 3 0 5 2 9 - 1 0 0 R e v . M
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A m e r i c a n S t a n d a r d I n c .
© A m e r i c a n S t a n d a r d I n c . 2 0 0 6
RECOMMENDED TOOLS AND MATERIALS
Putty Knife Regular Screwdriver Adjustable Wrench Sealant
Hacksaw Wax Ring/Gasket Flexible Supply Tube 1/2" Deep Well Nut Driver or
Closet Bolts Tape Measure Carpenters Level Deep Well Socket Wrench
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
!
NOTE: Pictures may not exactly define contour of china and components.
1
Recommended fitting type for back-to-back installations.
D epending upon your plumbing and venting conditions, the flow from
the Champion in a back-to-back installation may create a vacuum on
the system and draw water from the opposing bowl. The National
Standards Plumbing Code prohibits the use of a cross fitting for
drainage as throw over is possible. The code does approve a
directional "Y" style fitting with proper venting to direct the water
downward and away from the other toilet.
NOTE: BACK-TO-BACK INSTALLATION
Model 2002 Champion® Right Height™ Elongated Two Piece Toilet
Model 2018 Champion® Normal Height Elongated Two Piece Toilet
Model 2023 Champion® Normal Height Round Front Two Piece Toilet
Model 2057 Champion® Select Right Height™ Elongated Two Piece Toilet
Model 2087 Champion® Select Normal Height Elongated Two Piece Toilet
Model 2035 Champion® Select Normal Height Round Front Two Piece Toilet
Model 2058 Doral Classic™ Champion® Right Height™ Elongated Two Piece Toilet
Model 2074 Doral Classic™ Champion® Normal Height Elongated Two Piece Toilet
Model 2076 Doral Classic™ Champion® Normal Height Round Front Two Piece Toilet
Model 2367 Doral™ Champion® Right Height™ Elongated Two Piece Toilet
Model 2368 Doral™ Champion® Normal Height Elongated Two Piece Toilet
Model 2369 Doral™ Champion® Normal Height Round Front Two Piece Toilet
Model 2625 Oakmont™ Champion® Normal Height Elongated Two Piece Toilet
Model 2627 Oakmont™ Champion® Normal Height Round Front Two Piece Toilet
Model 2738 Oakmont™ Champion® Right Height™ Elongated Two Piece Toilet
Model 2733 Townsend™ Champion® Right Height™ Elongated Two Piece Toilet
Model 2735 Townsend™ Champion® Right Height™ Round Front Two Piece Toilet
Champion® 2-piece Toilets
Champion® Select 2-piece Toilets
Doral™ Champion® 2-piece Toilets
Doral Classic™ Champion® 2-piece Toilets
Oakmont™ Champion® 2-piece Toilets
Townsend™ Champion® 2-piece Toilets
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years.
To ensure this product is installed properly, please read these instructions carefully before you begin.
(Certain installations may require professional help.) Also be sure your installation conforms to local codes.
REMOVE OLD TOILET
a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply!
c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE: Mounting surface must be clean and level before new toilet is installed!