Adaptec ANA-62000 - Manual (Page 143)

11-7
Duralink64 Port Aggregation for NetWare
5 In the Existing Ports box, press Ins. The message No Ports
Present appears the first time you add a new group.
Figure 11-8. This message appears the first time
you add a new group.
6 In the Available Ports box, use F5 to select the ports for the new
group, and then press Enter.
Figure 11-9. For this scenario, three ports are selected for the new group.
7 Press Esc to return to the Group Configuration menu.
Figure 11-10. The selected ports are transferred to the Existing Ports box.
8 In the Group Configuration menu, select Group Type and
press Enter. The Group Type menu appears.
Figure 11-11. Group Type menu
No Ports Present
Existing Ports
1. Adptsf1
2. Adptsf2
3. Adptsf3
Existing Ports