Sony VPL-HW55ES - Manual (Page 28)

GB 28
1
Press the ? / 1 (ON/STANDBY) switch.
A message “POWER OFF?” appears on the screen.
2
Press the ? / 1 (ON/STANDBY) switch again before the message
disappears.
The ON/STANDBY indicator flashes in green and the fan continues to run to reduce
the internal heat. First, the ON/STANDBY indicator flashes quickly, during which
you will not be able to light up the lamp with the
? / 1 (ON/STANDBY) switch.
The fan stops and the ON/STANDBY indicator changes from flashing green to
remaining red.
The power is turned off completely, and you can disconnect the power cord.
Never disconnect the power cord while the indicator is flashing.
You can turn off the projector by holding the ? / 1 (ON/STANDBY) switch for about 1
second, instead of performing the above steps.
Turning Off the Power
Note