AccuTemp Steam N Hold - Manual (Page 4)

MP4002-1103
STEAM’N’HOLD™
4 of 17
LImITED WARRANTy
One Year - Parts & Labor - U.S. & Canada Only
AccuTemp Products, Inc. (AccuTemp) warrants that your AccuTemp equipment will be free of
defects in material and workmanship under normal use for a period of twelve (12) months from
installation or fifteen (15) months from date of shipment from AccuTemp, whichever date first
occurs (the Warranty Period). Registration of AccuTemp equipment is required at the time of
installation. Damage to AccuTemp equipment that occurs during shipment must be reported to the
carrier, and is not covered under this warranty. The reporting of any damage during shipment is the
sole responsibility of the commercial purchaser/user of such AccuTemp equipment.
AccuTemp provides an active service department, which should be contacted and advised of
service issues, regardless of the warranty period. During the warranty period, AccuTemp agrees
to repair or replace, at its option, F.O.B. factory, any part which proves to be defective due to
defects in material or workmanship, provided the equipment has not been altered in any way and
has been properly installed, maintained, and operated in accordance with the instructions in the
AccuTemp Owners Manual. During the warranty period, AccuTemp also agrees to pay for any
factory authorized equipment service agency (within the continental United States and Canada)
for reasonable labor required to repair or replace, at our option, F.O.B. factory, any part which
proves to be defective due to defects in materials or workmanship, provided the service agency has
received advance approval from AccuTemp factory service to perform the repair or replacement.
This warranty includes travel time not to exceed two hours and mileage not to exceed 50 miles
(100 miles round trip), but does not include post start-up assistance or training, tightening of loose
fittings or external electrical connections, minor adjustments, maintenance, gaskets or cleaning.
AccuTemp will not reimburse the expense of labor required to replace parts after the expiration of
the warranty period.
Proper installation is the responsibility of the dealer, owner-user, or installing contractor and is
not covered by this warranty. Improper installation can affect your warranty. Installation is the
responsibility of the Dealer, Owner/User or the Installation Contractor. See the Installation section
of the Owners Manual. While AccuTemp products are built to comply with applicable standards for
manufacturers, including Underwriters Laboratories (UL) and Underwriters Laboratories Sanitation
requirements, it is the responsibility of the owner and the installer to comply with any applicable local
codes that may exist.
AccuTemp makes no other warranties or guarantees, whether expressed or implied, including any
warranties of performance, merchantability, or fitness for any particular purpose. AccuTemp liability
on any claim of any kind, including negligence, with respect to the goods and services covered
hereunder, shall in no case exceed the price of the goods and services, or parts thereof, which gives rise
to the claim. In no event shall AccuTemp be liable for special, incidental, or consequential damages,
or damages in the nature of penalties.
This constitutes the entire warranty, which supersedes and excludes all other warranties, whether
written, oral, or implied.
WARRANTy