AVerMedia Technologies EB1304 NET - Manual (Page 40)

34
Chapter 8 Using the Remote Programs
User can use Microsoft Internet Explorer to access DVR system by entering the IP
address. To use this feature, make sure that you PC and EB 1304 NET both are
connected to the internet and the Network feature is enabled.
Accessing this feature for the first time you will be prompted by your browser to
install WebCamX.cab, allow the installation and you should be able to connect and
login afterwards.
For Windows 2000, click Yes when the Security Warning dialog box appears.
For Windows XP, click Install when the Internet Explorer - Security Warning dialog
box appears.
After installing the WebCamX.cab and when connecting to the DVR system, you
are required to enter User ID (Superuser or User) and password (default password
is 111111)and select the type of network. Superuser has the authority to remote
setup the DVR system configuration on WebCam viewer.
i Changing the Superuser and User default password is strongly
recommended.