AmbiCom WL250N-AR - Manual (Page 15)

2-3-1 Setup Procedures For ‘Cable Modem’:
1
2
Host Name (1): Please input the host name of your computer, this is optional, and only required if your service provider
asks you to do so.
MAC address (2): If your service provider only permits computer with certain MAC address to access internet, please input
MAC address of your computer here. If you’re using the computer which used to connect to Internet via
cable modem, you can simply press ‘Clone Mac address’ button to fill the MAC address field with the
MAC address of your computer.
When all settings are finished, you’ll see the following message displayed on your web browser:
Please click ‘Apply’ button to prepare to restart the router, and you’ll see this message:
Please wait for about 30 seconds, then click ‘OK!’ button. You’ll be back to router management interface again, and the router
is ready with new settings.
9