Spektrum SPMAS6410NBL User Manual

Page 11

Problem

Possible Cause

Solution

The system will
not connect

Your transmitter
and receiver are
too close together

Move transmitter 8 to 12
feet from receiver

You are around metal
objects

Move to an area with less
metal

Model selected is not
the model bound to

Check model selected and
ensure you are bound to
that model

Your transmitter was
accidentally put into
bind mode and is not
bound to your receiver
anymore

Rebind your transmitter
and receiver

Receiver quits
responding
during operation

Inadequate battery
voltage

Charge batteries. Spektrum
receivers require at least
3.5V to operate. An
inadequate power supply
can allow voltage to mo-
mentarily drop below 3.5V
and cause the receiver to
brown out and reconnect

Loose or damaged
wires or connectors
between
battery and receiver

Check the wires and
connection between bat-
tery and receiver. Repair or
replace wires and/or
connectors

Receiver loses
its bind

Transmitter stand or
tray could be depress-
ing the bind button

If stand is depressing bind
button, remove from stand
and rebind

Bind button pressed
before transmitter
turned on

Rebind your system follow-
ing binding instructions

Receiver blinking
at landing

System turned on and
connected, then receiv-
er turned off without
turning off transmitter

Turn off transmitter when
receiver is turned off