Blodgett BPBB SERIES - Manual (Page 17)

P/N 3000012219 REV. A Page 17
LIGHTING OVEN PILOT LIGHT
Standard Oven:
BEFORE LIGHTING PILOT LIGHT FOR OVEN LIGHT ALL PILOTS FOR TOP
BURNERS
1. Remove the oven kick plate.
2. Turn the oven gas valve to OFF.
Figure 16: Standard Oven Gas Valve Location
3. Turn the oven thermostat to OFF.
4. Push and hold down the red button on the pilot valve to light the pilot light.
Continue to hold down the red button for 30 seconds until the pilot light
remains on when the red button is released.
5. If the pilot light goes out, repeat step 4. (In a new range installation this
procedure may have to be repeated several times until air is purged from gas
line.)
6. Be sure oven door is closed.
7. Turn the oven thermostat to desired temperature setting and turn the oven
gas valve to ON. Oven will light.
8. Verify that the pilot light is still on.
9. Turn oven gas valve to OFF.
10. Reinstall the kick plate.