Samsung SH-W162L-LCAH - Manual (Page 15)

and Connecting Cables
Installing DVD±R/RW Drive
When you have one DVD±R/RW Drive and the other ODD products: Set it to MA (Master) /
SL (Slave),
a : Master Drive (Select the MA jumper) b : Slave Drive (Select the SL jumper)
c : HDD d : Motherboard
e : Primary 1 f : Secondary 1
Connecting the Jumper to the Master/Slave Port
Connect the jumper to the slot in the back of the DVD±R/RW Drive.
When you connect the jumper to MA (Master), the drive runs as the master, and when you connect it
to SL (Slave), the drive runs as the slave.
When you connect it to CS (CSEL), you can control the device using the host interface signal CSEL.
(Connection to MA is recommended.)
MA : Master
SL : Slave
CS : Cable Select(CSEL)