Kinivo BTC8 Bluetooth FM Transmitter - Manual (Page 14)

P 12/16
previous /next song on BTC8
‹ When a Bluetooth device and a wired device are
connected at the same time, BTC8 will switch to the last
connected device for playback.
If you plug in a music player to the Line in socket of BTC8
while playing music from a Bluetooth device, the music from
the wired device will be played back.
g) Making Calls with BTC8
If your cell phone is Bluetooth-enabled and has a HFP
connection set up with BTC8, you can make calls and
remotely control calls using BTC8.
i. Set BTC8 and your car FM radio to the same frequency;
ii. Pair your cell phone with BTC8. After successfully
establishing a HFP connection, (red LED of button
comes on) you can make calls with BTC8.
iii. Redial last number: Press and hold button for 3
seconds
iv. Cancel calling: Press button to cancel the call.
v. Answer call: When ringing, press button to answer
call.
vi. Reject call: When ringing, press and hold button
for about 2 seconds to reject call.
vii. End call: When in a conversation, press button to
end call.
h) Line-out
If your car stereo system has a stereo line in socket, you
can also transmit music to it using an audio cable. The
input socket in your car stereo is called “AUX” or
“Auxiliary”.
You have to use a 3.5mm to 3.5mm audio cable. One end
inserts into the Line out socket of BTC8 and the other end