Accton Technology SIP Gateway VG3300 Series - Manual (Page 73)

Section Item Field Description Default
Update
Entry Enter entries
Index: Enter dialing number
Public Address: Enter SIP account.
Port: Enter port number
Via Proxy: Select via Proxy or not Empty
Delete
Entry Delete entries
Index: Enter the index for delete. Empty
13. Use Private IP (Behind NAT)
Using a Private IP in a NAT Environment
The gateway is able to communicate with other gateways under a NAT environment using Private
IP addresses on the LAN side of your IP Sharing device. However you must configure the IP
Sharing device to treat the gateway as a Virtual Server using UDP port 5060,2000.
You will have to ask MIS personnel to enable the ports listed in the following table.
Packet Modes Using Ports
SIP Signal Packets UDP 5060
Gateway Signaling Port UDP 2000
Gateway RTP Base Port UDP 4000
FTP software upgrade TCP 21
Web management TCP 80
If you want to use private IP behind NAT and Proxy Server is in Internet, you must need to enable
STUN service. If the system is installed in VPN, it is not necessary to Enable Stun.
70