Phottix Odin for Sony - Manual (Page 11)

En INSTRUCTION MANUAL
11
Second Curtain Sync will fire the flash at the
end of an exposure, not at the beginning. This
can be combined with longer exposures for
creative effects.
1. Second Curtain Sync cannot be set on the
Odin TCU.
2. Second Curtain Sync needs to be set on the
camera – consult your camera manual for
specific menu settings.
Second Curtain Sync (Rear Curtain
Sync)
1, The Clear Button will erase any settings
currently in the TCU.
2, Press and hold the Clear button for 2
seconds to remove TTL/M/Off, Ratio, Zoom
and EV settings currently in the TCU.
3. The Clear button will not change or reset the
transmission channel (1, 2, 3 or 4) set on the
TCU.
Using the Clear Button
The test button will fire all flashes connected
to Phottix Odin receivers that are on the same
channel as the TCU.
1. Press the Test button.
2. Flashes will fire in sequence: Group A,
followed by Group B and C.
Using the Test Button
speed up to 1/8000 sec., are support by the
Phottix Odin when used with cameras and
flashes offering this function.
Note:
When using HSS the power of a flash is
greatly reduced.