Kenwood DNX7210BT User Manual
Page 55
108
108
109
■
Bluetooth section
Technology
DNX7210BT
: Bluetooth Ver.3.0 Certified
DNX5210BT, DNX5510BT, DNX4210BT
: Bluetooth 2.0 Certified
Frequency
: 2.402 – 2.480 GHz
Output Power
: +4dBm (MAX), 0dBm (AVE), Power Class2
Maximum Communication Range
: Line of sight approx. 10m (32.8 ft)
Profile
DNX7210BT
• HFP (Hands Free Profile)
• SPP (Serial Port Profile)
• HSP (Headset Profile)
• A2DP (Advanced Audio Distribution Profile)
• AVRCP (Audio/Video Remote Control Profile)
• OPP (Object Push Profile)
• PBAP (Phonebook Access Profile)
• Multi Profile support
DNX5210BT, DNX5510BT, DNX4210BT
• HFP (Hands Free Profile)
■
DSP section (DNX7210BT)
Graphics equalizer
Band: 7 Band
Frequency (BAND1 – 7)
: 62.5/160/400/1k/2.5k/6.3k/16k Hz
Gain
: -9/-8/-7/-6/-5/-4/-3/-2/-1/0/1/2/3/4/5/6/7/8/9 dB
X’over
High pass filter
Frequency: Through, 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/
120/ 150 / 180/ 220/ 250 Hz
Slope: -6/-12/-18/-24 dB/Oct.
Low pass filter
Frequency: 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/
150/ 180/ 220/ 250 Hz, Through
Slope: -6/-12/-18/-24 dB/Oct.
Position
Front / Rear /Subwoofer Delay
: 0 – 6.1 m (0.02 m Step)
Gain
: -8 – 0 dB
Subwoofer level
: -50 – +10 dB
■
FM tuner section
Frequency Range (50 kHz)
: 87.5 MHz – 108.0 MHz
Usable Sensitivity (S/N : 26 dB)
DNX7210BT
: 0.9 μV/75 Ω
DNX5210BT, DNX5510BT, DNX4210BT
: 0.7 μV/75 Ω
Quieting Sensitivity (S/N : 46 dB)
DNX7210BT
: 2.0 μV/75 Ω
DNX5210BT, DNX5510BT, DNX4210BT
: 1.6 μV/75 Ω
Frequency Response (± 3.0 dB)
: 30 Hz – 15 kHz
S/N Ratio (dB)
: 65 dB (MONO)
Selectivity (± 400 kHz)
: ≥ 80 dB
Stereo Separation
: 35 dB (1 kHz)
■
AM tuner section
Frequency Range (9 kHz)
LW
: 153 – 279 kHz
MW
: 531 – 1611 kHz
Usable Sensitivity
MW
: 25μV
LW
: 45μV
■
Video section
Color System of External Video Input
: NTSC/PAL
External Video Input Level (RCA/mini jack)
: 1 Vp-p/ 75 Ω
External Audio Max Input Level (RCA/mini jack)
: 2 V/ 25 kΩ
Video Output Level (RCA jacks)
: 1 Vp-p/ 75 Ω
Audio Output Level (RCA jacks)
: 1.2 V/ 10 kΩ
■
Audio section
Maximum Power (Front & Rear)
: 50 W x 4
Full Bandwidth Power (Front & Rear) (PWR DIN45324,
+B=14.4V)
: 30 W x 4
Preout Level (V)
DNX7210BT
: 4 V/ 10 kΩ
DNX5210BT, DNX5510BT, DNX4210BT
: 2 V/ 10 kΩ
Preout Impedance
: ≤ 600 Ω
Speaker Impedance
: 4 – 8 Ω
Tone (DNX5210BT, DNX5510BT, DNX4210BT)
Bass: 100Hz ± 10dB
Middle: 1kHz ± 10dB
Treble: 10kHz ± 10dB
■
External SW (DNX7210BT)
Maximum Power Supply Current
: 500 mA
■
Navigation section
Receiver
: High-sensitivity GPS receiver
Reception Frequency
: 1575.42 MHz (C/A code)
Acquisition Times
Cold : 35 seconds (typ)
(On average for a stationary receiver with a clear
view of the sky)
Reception Frequency
: 1575.42 MHz (C/A code)
Update Rate
: 1/second, continuous
Velocity : 0.05 m/sec. RMS
Accuracy
Position: <6 meters, typical
Velocity: 0.1 meter/sec RMS
Position Method
: GPS
Antenna
: External GPS antenna
■
General
Operating Voltage
: 14.4 V (10.5 – 16 V allowable)
Maximum Current Consumption
: 15 A
Installation Dimensions (W x H x D)
DNX7210BT
: 182 x 112 x 163 mm
DNX5210BT, DNX5510BT, DNX4210BT
: 182 x 112 x 160 mm
Operational Temperature Range
: -10
°C – +60 °C
Weight
DNX7210BT: 2.6 kg
DNX5210BT, DNX5510BT: 2.2 kg
DNX4210BT: 2.0 kg
NOTE
• Although the effective pixels for the liquid crystal
panel is given as 99.99% or more, 0.01% of pixels
may not light or may light incorrectly.
Specifications subject to change without notice.