Vaisala WXT510 - Manual (Page 56)

User’s Guide ______________________________________________________________________
54 __________________________________________________________________ M210470EN-D
The response depends on the communication protocol, see the
examples.
Example (ASCII):
0XZ
0TX,Start-up
Example (SDI-12):
0XZ!0 (=device address)
Example (NMEA 0183):
0XZ
$WITXT,01,01,07,Start-up*29
Precipitation Counter Reset
(aXZRU)
This command is used to reset the rain and hail accumulation and
duration parameters Rc, Rd, Hc, and Hd.
Command format in ASCII and NMEA 0183: aXZRU
Command format in SDI-12: aXZRU!
where
a
= Device address
XZ = Reset command
= Command terminator in ASCII and NMEA 0183
! = Command terminator in SDI-12
where
a
= Device address
XZRU = Precipitation counter reset command
= Command terminator in ASCII and NMEA 0183
! = Command terminator in SDI-12