Setup menu, Continued – Anthem Audio AVM 50 User Manual

Page 37

Procedure for Manual Test Sequence:

• Enter the Setup Menu. Go to ‘5. LEVEL CALIBRATION’ and press SELECT.

• Use the

buttons to set a. NOISE SEQUENCE to ‘Manual’.

• Press the

buttons to go from speaker to speaker.

• As each speaker plays, use the

buttons to adjust its loudness relative to other speakers.

• Press BACK to stop the test noise.

Procedure for Auto Test Sequence:

• Enter the Setup Menu. Go to ‘5. LEVEL CALIBRATION’ and press SELECT.

• Use the

buttons to set a. NOISE SEQUENCE to ‘Auto’.

• Press SELECT to start the automatic sequence.

• As each speaker plays, use the

buttons to adjust its loudness relative to other speakers. After

you make an adjustment, the next speaker will play.

• Press BACK to stop the test noise.

3. SETUP MENU

continued …