beautypg.com

Posey Premium "Gel Heel Pillow" User Manual

Posey, Premium “gel” heel pillow

background image

Wound prevention

Quality Products since 1937

M6151 032309

Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA

Phone: 1.800.447.6739 • Fax: 1.800.767.3933 • Web: www.posey.com

MDSS GmbH

Schiffgraben 41

D-30175 Hannover, Germany

© 2009 Posey Company. All rights reserved.

EC REP

Posey

®

Premium “Gel” Heel Pillow

Premium “gel” Heel Pillow

The Posey Premium “Gel” Heel Pillow is a machine washable, multi-

purpose Heel Pillow that is ideal for individuals in acute care, long-term

care and homecare settings. It can be used to help treat a variety of heel

and foot problems, including skin irritation, heel ulcers and foot drop.

REF

6118

Premium “Gel” Heel Pillow

REF

6118GP Replacement Gel Pads

Features:

• Soft, non-shear polyester fabric offers a comfortable fit and protects the foot,

ankle and calf from skin irritation.

• Removable gel pad fits underneath the calf for hot/cold therapy applications.

• Hollow core micro-fiber filling retains its resiliency even after repeated

washings and will not bottom out.

• Open Heel cutout ensures heel isolation and promotes air circulation.

• Ankle and calf straps can be adjusted for different sized patients.

• Padded foot support and adjustment side straps help control foot drop.

• Interchangeable - can be used on either foot.

• Meets CA 117, Section E for flame retardancy.

moNitoriNg

Be sure to follow your facility’s policies and guidelines for

frequency of patient monitoring. Posey recommends that this product

be removed at least every two (2) hours to check for skin integrity, proper

circulation and range of motion.

iNsPeCtioN

Inspect before each use: check for broken stitches or parts; torn,

cut or frayed material or guides. DO NOT use soiled or damaged products.

aPPliCatioN iNstruCtioNs:

DO NOT walk while wearing this product!

1. Release all hook and loop closures.

2. Place the patient’s foot into the “Gel” Heel Pillow so that the heel is

suspended over the opening.

3. Attach the calf and ankle strap to the opposing side (Fig. 1). The straps should

be applied securely to ensure the “Gel” Heel Pillow cannot be easily removed

from the patient’s lower leg. Place fingers through the heel opening to ensure

that the heel is properly isolated (Fig. 2).

4. Ensure that the foot drop straps are threaded through the white tabs and

adjust to the desired degree of control (Fig. 3).

NOTE: The Premium “Gel” Heel Pillow can be used with and without the gel

pad (Fig. 4). One pad is included with each Pillow. Additional pads can be

ordered separately.

HeatiNg aNd CooliNg oF tHe gel Pad

Heating: Place the gel pad in a container of water to raise its temperature

to the desired level. Before applying, knead the pad to ensure uniform heat

distribution. DO NOT heat in a microwave!

The gel material will continue to warm up before reaching

its final temperature. Check temperature to avoid burning skin before using.

Repeat if necessary.

DO NOT OVERHEAT!

Cooling: Place the pad in a freezer for 30 mins. Before applying, knead the

pad to ensure uniform temperature distribution.
Longer exposure in a freezer may be required depending on desired

temperature. The gel pad can freeze solid after 2 hours depending on the freezer.

lauNderiNg iNstruCtioNs:
1. Secure all straps before laundering.

2. Remove gel pad from Heel Pillow.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Calf/Ankle

Straps

disPosal

Properly dispose of the product per facility’s policy for

BIOHAZARDOUS materials.
storage aNd HaNdliNg

This device is designed for use in normal indoor environments. This

device may be stored in ambient warehouse temperatures at normal

humidity levels. Avoid excess moisture or high humidity that may

damage product materials.

LATEX