Posey Headboard/Footboard Pads - Manual

M6081 REV B 121610
Posey
®
Bed Headboard/Footboard Pads
Application Instructions:
1. Position the Headboard/Footboard Pads on the inside of the headboard and footboard. Ensure that the top
rail of the headboard and footboard are completely covered by the extended width portion of the pad.
2. Wrap both sets of vertical straps (fig. 1) around the headboard/footboard and connect using the
quick-release buckles.
3. Wrap the horizontal set of straps around the headboard/footboard and connect using the quick-
release buckle.
4. Pull all straps and quick-release buckles snug, but not so tight as to disfigure the product.
Storage And Handling
This device is designed for use in normal indoor environments. This device may be stored in ambient
warehouse temperatures at normal humidity levels. Avoid excess moisture or high humidity that may
damage product materials.
© 2010 Posey Company. All rights reserved.
Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014
The Posey Bed Headboard and Footboard Pads are designed to help the clinician prevent
patient injury. The pads cushion the headboard and footboard, as well as helping close
the gaps between the headboard and footboard and the mattress. Designed for use with
the Posey Bed, they also work independently to help provide an extra measure of safety
and protection for all patients. Made of durable, plush foam and covered in water-
repellent, fire retardant nylon denier. Pads attach to the bed using polypropylene straps
with quick-release buckles.
REF 8002 35” H x 17” L x 2” Thick (89 cm x 43 cm x 5 cm)
Disposal
Properly dispose of the product per facility’s policy for
BIOHAZARDOUS materials.
Fig. 1
8002
Cleaning Instructions:
Wipe clean with soap and water or disinfectant.
DO NOT use cleaners that contain Phenol or Benzyl.
M6081 REV B 121610
Posey
®
Bed Headboard/Footboard Pads
Application Instructions:
1. Position the Headboard/Footboard Pads on the inside of the headboard and footboard. Ensure that the top
rail of the headboard and footboard are completely covered by the extended width portion of the pad.
2. Wrap both sets of vertical straps (fig. 1) around the headboard/footboard and connect using the
quick-release buckles.
3. Wrap the horizontal set of straps around the headboard/footboard and connect using the quick-
release buckle.
4. Pull all straps and quick-release buckles snug, but not so tight as to disfigure the product.
Storage And Handling
This device is designed for use in normal indoor environments. This device may be stored in ambient
warehouse temperatures at normal humidity levels. Avoid excess moisture or high humidity that may
damage product materials.
© 2010 Posey Company. All rights reserved.
Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014
The Posey Bed Headboard and Footboard Pads are designed to help the clinician prevent
patient injury. The pads cushion the headboard and footboard, as well as helping close
the gaps between the headboard and footboard and the mattress. Designed for use with
the Posey Bed, they also work independently to help provide an extra measure of safety
and protection for all patients. Made of durable, plush foam and covered in water-
repellent, fire retardant nylon denier. Pads attach to the bed using polypropylene straps
with quick-release buckles.
REF 8002 35” H x 17” L x 2” Thick (89 cm x 43 cm x 5 cm)
Disposal
Properly dispose of the product per facility’s policy for
BIOHAZARDOUS materials.
Fig. 1
8002
Cleaning Instructions:
Wipe clean with soap and water or disinfectant.
DO NOT use cleaners that contain Phenol or Benzyl.