Posey Bed Universal Strap - Manual (Page 2)

Posey
®
Universal Bed Strap Instructions
(Continued)
1. Wrap the Large Horizontal Strap A
horizontally around the head or
footboard and buckle (Fig. 1). Adjust
the strap so that it is snug around the
head or footboard (Fig. 2). Note: The
large buckle from Strap A should be
facing in toward the bed.
3. Wrap each of the Small Vertical Straps C
vertically around the head or footboard
and buckle (Fig. 6). Adjust the straps so
they are snug (Fig. 7). Note: The buckles
from Strap C should be facing outward
and the loop should be engaged with
hook on Strap A.
4. Repeat at other end of the bed.
2. Adjust the position of Strap A so the three Slider Bar Support Straps are between the two vertical frame bars (Fig. 3). Raise the
slider bar (part D from assembly manual) from the frame up even with the three Slider Bar Support Straps B (Fig. 4). Using the tab
provided, unhook the hook and loop from each strap and place the slider bar centered into each strap (Fig. 5). Close each strap
back tightly.
Fig. 1
A
Fig. 2
Fig. 6 Fig. 7
Fig. 4
C
B
Fig. 5
• Make sure to properly secure the Universal Bed Strap when in use.
• Make sure to use the Universal Bed Strap on medical beds only. This product is NOT designed to be used with a regular home bed.
Washing Instructions:
Application Instructions:
Slider Bar
Fig. 3
B
Storage and Handling
This device is designed for use in normal indoor
environments. This device may be stored in ambient
warehouse temperatures at normal humidity levels.
Avoid excess moisture or high humidity that may
damage product materials.
Disposal
Properly dispose of
the product per facility’s policy for
BIOHAZARDOUS materials.
Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com • Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014