Symetrix RC-6000 Remote Control - Manual (Page 2)

2
QUICK START GUIDE: RC-6000 Remote Control
Introduction and Front Panel
6408 216th Street SW | Mountlake Terrace, WA 98043 USA
T +1.425.778.7728 F +1.425.778.7727 | www.symetrix.co
Introduction
The AirTools RC-6000 is an accessory remote control
for the 6000 and 6100 Broadcast Audio Delays. The RC-
6000 Remote Control duplicates EXIT, START, COUGH and
DUMP buttons found on the front panel of
the AirTools 6000 and 6100. It also features LED indiction
of the delay’s current status including INACTIVE, ACTIVE,
HALF delay memory built and FULL delay memory built.
Mechanical Data
ITEM DESCRIPTION DETAILS
Space Required WDH: 18.16 cm x 9.78 cm x 3.81 cm / 7.15 in x 3.85 in x 1.5 in.
Depth does not include connector allowance. Allow at least 1 inch additional clearance for rear panel connec-
tions. Additional depth may be required depending upon your
specific wiring and connections.
Electrical N/A Power comes from the 6000 or 6100 via the included cable.
Ventilation Maximum recommended ambient operating temperature is 30
C / 86 F. Ventilation should not be impeded by covering the unit with items
such as newspapers, tablecloths, curtains, etc.
Weight 0.24 kg / 0.52 lbs.
FRONT PANEL
ITEM DESCRIPTION DETAILS
INACTIVE Red LED Indicates that the current delay is fully exited (exactly 0.0 seconds) and the status of the delay is
“DELAY REMOVED”.
ACTIVE Red LED Indicates that some amount of delay is currently built and the delay is currently in some mode of opera-
tion.
HALF Red LED Indicates that at least half of the currently set amount of delay has been achieved.
FULL Red LED Indicates that the full amount of the currently set amount of delay has been achieved.
EXIT Momentary amber lighted switch Mirrors the status and function of the EXIT button on the front of the delay. The button flashes to
indicate that the delay is “REDUCING DELAY TIME”.
START Momentary green lighted switch Mirrors the status and function of the START button on the front of the delay. The button flashes to
indicate that the delay is “ADDING DELAY TIME”.
COUGH Momentary white lighted switch Mirrors the status and function of the COUGH button on the front of the delay. The button lights while
the button is pressed to indicate that the delay is “WAITING FOR RELEASE”.
DUMP Momentary red lighted switch Mirrors the status and function of the DUMP button on the front of the delay. The button lights while the
button is pressed.
INACTIVE ACTIVE HALF FULL
RC-6000
REMOTE
CONTROL
EXIT
COUGH
START
DUMP