Arcam Logo - Manual (Page 8)

Technical specifications
System design One-way speaker, with 10 litres internal volume. The cabinet is solidly
constructed from machined MDF with internal bracing.
Drive unit 10” (254mm) subwoofer drive unit with long excursion, magnetically
shielded.
Frequency range 20Hz to 250Hz
Impedance 4Ω nominal
Sensitivity 85dB/watt, measured at 1m
Crossover Fourth order Linkwitz-Riley crossover circuit, 24dB/octave (80dB/decade),
adjustable for frequency and Q.
Connections LEFT , RIGHT and SUb inputs and outputs: RCA phono sockets (gold), max
2.5V, >22kΩ. The unit may be ‘daisy-chained’.
Mains supply 100V–240V at 50/60Hz. Fuse T2.5AL 250V
Amplifier 200 watts/4Ω, under normal operating conditions, 275W max.
Finish Black paint
Dimensions 280 x 280 x 416mm (WxDxH)
Mass Net 15kg (Note: Take care when lifting the unit)
Note that all specification values are typical, unless otherwise stated.
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are
subject to change without notice.
specification
Worldwide Guarantee
This entitles you to have the unit repaired free of
charge, during the first two years after purchase, at
any authorised Arcam distributor provided that it
was originally purchased from an authorised Arcam
dealer or distributor. The manufacturer can take no
responsibility for defects arising from accident, misuse,
abuse, wear and tear, neglect or through unauthorised
adjustment and/or repair, neither can they accept
responsibility for damage or loss occurring during
transit to or from the person claiming under the
guarantee.
The warranty covers:
Parts and labour costs for two years from the
purchase date. After two years you must pay for both
parts and labour costs. The warranty does not cover
transportation costs at any time.
Claims under guarantee
This equipment should be packed in the original
packing and returned to the dealer from whom it
was purchased, or failing this, directly to the Arcam
distributor in the country of residence.
It should be sent carriage prepaid by a reputable
carrier – not by post. No responsibility can be
accepted for the unit whilst in transit to the dealer or
distributor and customers are therefore advised to
insure the unit against loss or damage whilst in transit.
For further details contact Arcam at:
Arcam Customer Support Department,
Pembroke Avenue, Waterbeach,
CAMBRIDGE, CB25 9QR, England
or www.arcam.co.uk .
Problems?
If your Arcam dealer is unable to answer any query
regarding this or any other Arcam product please
contact Arcam Customer Support at the above
address and we will do our best to help you.
On-line registration
You can register you product on-line at
www.arcam.co.uk .