Protocol entry – Alcatel Carrier Internetworking Solutions 6648 User Manual
Page 373
OS6624/6648 Architecture
OmniSwitch Troubleshooting Guide
September 2005
page -49
3-Protocol Entry
•
Used to allow different rules to be applied for different protocols associated with same address. Proto-
col Offset Register is used to identify which protocols will be used in the system. Up to 18 Layer 2
protocols are supported. There is a separate protocol entry for each protocol defined in the Protocol
Offset Register
•
Priority level of the packet for queuing
•
Filter (6 bits), Mirror (5 bits), Priority (5 bits), TOS (6 bits) indices for flow-based rules. Each address
that is to be used in a flow definition is assigned a unique index for the appropriate rule (i.e. Filter,
Mirror, priority or TOS).
•
TOS marking rules
•
Global destination/source priority rules (i.e. all packets with this destination address get this priority).
•
Global destination/source filter rules (i.e. filter all packets with this source address)
•
Global destination/source mirror rule (i.e. mirror all packets with this source address)
•
Pointer to NetID
•
4-NetID Entry
•
Contains transmit enables, prepend information and address based VLAN information.