Apex Digital MD 100 - Manual (Page 6)

10 A P E X D I G I T A L 11 A P E X D I G I T A L MD - 100 MD - 100
Identification of Control
FRONT PANEL
BACK PANEL
INSTALLATION
MOUNTING
When choosing a mounting location, the DVD unit should be stable and
in a position where sufficient cooling is available. Before mounting, attach
the supplied brackets and hardware for top or bottom mount.
Plug the supplied CLA power cord into the back of the DVD unit and run
the wire to a power point. (Some vehicles do not have accessory power
outlets.
In this case, the cigarette lighter must be used.) Plug the
supplied yellow video cable into the video output of the DVD unit and plug
the other end into the video input of the monitor (not supplied). Repeat
this process with the red and white audio cords.
Introduction ...................... 1
Safety Precautions .............. 2 - 3
Important Safety Instructions
.......................................... 4 - 7
Precautions ........................ 8 - 9
Identification of Control ...... 11
Remote Control ................. 12 - 13
Connecting to a TV using a RF
Modulator..............................14-15
What is MP3 and VCD ?..... 16 - 17
Playing Back a Disc .......... 18 - 19
Locating a Specific Title, Chapter
or Track .............................. 20 - 27
Zooming a Picture .............. 28
Selecting the Camera Angle/
Selecting a Language ........ 29 - 30
Selecting Subtitles ............. 31
Using the On-Screen
Display .............................. 32
Setting the Parental Lock ... 33 - 34
Customizing the Function
Settings ............................. 35
Notes on Discs ................... 36 - 38
Troubleshooting Guide ....... 39 - 40
Specifications ..................... 41
Memo ................................. 42 - 43
Warranty .......................... 44 - 45
Table of Content