Apex Digital MD 100 - Manual (Page 3)

4 A P E X D I G I T A L 5 A P E X D I G I T A L MD - 100 MD - 100
4. Heat
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
5. Water and Moisture
Do not use this product near water - for example, near a bath tub,
in a wet basement, or near a swimming pool.
6. Cleaning
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7. Power-cord Protection
Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, conveniences receptacles, and the
point where they exit from the product.
8. Overloading
Do not overload wall outlets as this can result in a risk of fire or
electric shock.
9. Lightning
Unplug it from the wall outlet. This will prevent damage to the
product due to lightning and power-line surges.
10. Object and Liquid Entry
Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind on
the product.
11. Attachments
Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
12. Disc Tray
Keep your fingers well clear of the disc tray as it is closing. It may
cause serious personal injury, or do damage to the machine.
Important Safety Instructions Important Safety Instructions
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS
AND INSTRUCTIONS GIVEN IN THIS OWNER’S
MANUAL AND THOSE MARKED ON THE UNIT.
RETAIN THIS BOOKLET FOR FUTURE
REFERENCE.
This set has been designed and manufactured to assure personal
safety. Improper use can result in electric shock or fire hazard. The
safeguards incorporated in this unit will protect you if you observe the
following procedures for installation, use and servicing. This unit is
fully transistorized and does not contain any parts that can be
repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE
EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
1. Read The Owner’s Manual After Unpacking This Product.
Read the owner’s manual carefully, and follow all the operating and
other instructions.
2. Power Source
This product should be operated only from the type or power source
indicated on the marketing label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other
sources, refer to the operating instructions.
3. Ventilation
Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from over-
heating. There openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug or
the similar surface.