Abit AMD ATHLON KV8 PRO User Manual
Kv8 pro, Amd athlon
Table of contents
Document Outline
- Introduction
- Hardware Setup
- BIOS Setup
- μGuru Utility
- Standard CMOS Features
- Date (mm:dd:yy):
- Time (hh:mm:ss):
- IDE Channel 1 Master / Slave, IDE Channel 2 Master / Slave:
- IDE HDD Auto-Detection:
- IDE Channel 1 Master / Slave, IDE Channel 2 Master / Slave:
- Access Mode:
- Capacity:
- Cylinder:
- Head:
- Precomp:
- Landing Zone:
- Sector:
- Drive A & Drive B:
- Floppy 3 Mode Support:
- Video:
- Halt On:
- Base Memory:
- Extended Memory:
- Total Memory:
- Advanced BIOS Features
- Advanced Chipset Features
- AGP & P2P Bridge Control:
- AGP Aperture Size:
- AGP 2.0 Mode:
- AGP Driving Control:
- AGP Fast Write:
- AGP Master 1 WS Write:
- AGP Master 1 WS Read:
- AGP 3.0 Calibration cycle:
- DBI Output for AGP Trans.:
- DRAM Configuration:
- Current FSB Frequency:
- Current DRAM Frequency:
- DRAM Timing Selectable:
- LDT & PCI Bus Control:
- Upstream/Downstream LDT Bus Width:
- LDT Bus Frequency:
- PCI1/PCI2 Master 0 WS Write:
- PCI1/PCI2 Post Write:
- Memory Hole:
- Vlink Data Rate:
- Integrated Peripherals
- Power Management Setup
- PnP/PCI Configurations
- Load Fail-Safe Defaults
- Load Optimized Defaults
- Set Password
- Save & Exit Setup
- Exit Without Saving