Viewing the event log, Viewing the event log a-16, A-16 – Adaptec SATA AND SCSI RAID CONTROLLERS User Manual
Page 78
A-16
Adaptec RAID Configuration Utility (ARC)
Viewing the Event Log
The BIOS-based event log stores all firmware events (configuration
changes, array creation, boot activity, and so on).
The event log has a fixed size. Once full, old events are flushed as
new events are stored. Also, the log is volatile; therefore, it is
cleared after each system restart.
To access the event log:
1
Restart the computer, then press Ctrl+A when prompted to
access the ARC utility.
2
If multiple controllers are installed, select the controller you
want to configure, then press Enter.
3
From the ARC menu, press Ctrl+P.
The Controller Service Menu appears.
4
Select Controller Log Information, then press Enter. The
current log is displayed.