Brother PJ-622 - Manual (Page 28)

Brother PJ-600 Series Command Reference 26
© 2011 Brother Industries, Ltd. All Rights Reserved.
Name Specify line feed of 1/6 inch
Syntax ESC + 2
1B H + 32 H
Description Specify line feed of 1/6 inch (6LPI).
The line feed becomes 1/6 inch.
After this command is specified, the page length in lines and bottom margin must
be specified again.
Name Specify line feed of 1/8 inch
Syntax ESC + 0
1B H + 30 H
Description Specify line feed of 1/8 inch (8LPI).
The line feed becomes 1/8 inch.
After this command is specified, the page length in lines and bottom margin must
be specified again.
Name Line feed at 8 LPI
Syntax ESC + ~ + + + {n1}
1B H + 7E H + 2B H + {n1}
Description Specify whether the line feed is “0.125"” or “0.12"” when the line feed is set to 1/8
inch.
You can use this command to allow extended ASCII graphic characters to touch
each other without creating a small vertical gap between the characters.
After this command is specified, the page length in lines and bottom margin must
be specified again.
Definition of {n1}
01 H(1) or 1F H(31) :0.120 inch Line feed
Other than those listed above :0.125 inch Line feed