ASA Electronics AM/FM RADIO WITH AUDIO CASSETTE PLAYER - Manual (Page 2)

------------- Content-------------
Operating Instruction...........................................2-6
Setting the Clock...................................................7
Care and Maintenance...........................................7
AM and FM Reception In a Mobile Environmen....8
Some Facts About AM and FM Reception..............8
FM Reception While You Are Driving......................9
Specifications............................................................10
Warranty......................................................................11
Wiring Diagram.........................................................12
- 1 - - 2 -
. POWER ON-OFF/VOLUME CONTROL(PUSH ON/VOL)
Press and release this button to turn the unit on or off. When on, rotate the control
clockwise to increase the volume level. If the ignition switch is on, the radio will
also automatically turn on when a cassette tape is inserted.
. VOLUME CONTROL(VOL)
To increase the volume level, rotate the vol control clockwise. Vol : will appear and
the volume level will be shown on the display panel from a minimum of vol:0 to a
maximum of vol:40. To decrease the volume level, rotate the vol control counter
clockwise. The display will automatically return to the normal indication 5 seconds
after the last volume adjustment or when another function is activated. This control
is also used in conjunction with the AUD button (3) to adjust the bass,
treble, balance and fader levels as described in,,and.
.AUD CONTROL BUTTON
This button is used to select the audio funtion(bass,treble,balance,fader or volume).
Pressing the AUD button accesses the desired function,whose setting is adjusted
using the VOL control.Pressing the button will first display the bass adjustment
(BAS:on the display panel),then treble adjustment (TRE: will appear on the display),
balance (BAL:),fader(FAD:) and then volume (VOL:).The display will automatically
return to the normal indication 5 seconds after the last adjustment or when another
function is activated.
. BASS CONTROL
Select the Bass mode by pressing the AUD button so the BASS:indication
OPERATING INSTRUCTIONS
AUD
T F