KYORITSU 3316 - Manual (Page 21)

― 19 ―
Female
Screw
Male Screw
Prod
Pickel Prod
Extension Prod
Hexagonal Hole
8−3 Test prods and replacement
1. Types of Test prods
MODEL8072:Standard Test prod
Used for ordinary measurement.
(Attached to the Line probe at the time of
purchase.)
MODEL8017:Extension probe
Used in difficult-to-reach situations.
MODEL8016:Pickle prod (Optional)
Used to hook the probe on a conductor.
2. How to replace Test prod
To remove the Test prod, turn the cap of LINE probe
counterclockwise. Insert the threaded end of another prod
into the hexagonal hole on the probe cap as shown. Then,
turn the probe cap clockwise to secure it on the body of the
probe.