Ameriphone XL-25s - Manual (Page 7)

3. Plug in the short phone line
cord and mount the phone as
shown in Figure 7.
4. See Desktop Use section
and follow steps 1 and 2.
Setting up Your
Dialogue XL-25s (continued)
2. Plug the AC adapter into an
electric outlet and into the
telephone as shown in Figure 4.
3. Lift the handset and listen for a
dial tone.
The phone is ready to use.
Wall Mount
1. Pull the handset hook out as
shown in Figure 5 and reverse
its position so that the hook
points up and will hold the
handset when you hang up.
2. Insert the tabs of the phone
base into the slots in the lower
position of the base as shown
in Figure 6. Push the phone
base in and down firmly until it
snaps into place.
MANU AL
AUTO
Figure 7 - Wall mounting
installation
5
Figure 5 - Reversing the Hook
MANUAL
AUTO
Figure 6 - Phone Base for Wall
Mounting