WEN 56206 6 Ton Electric Log Splitter - Manual (Page 16)

16
5. Pour approximately 0.85 Gallon of approved hydraulic fluid (AW32 hydraulic fluid for
operation over 40°F or Dextron automatic transmission fluid for operation below 40°F) into
the tank.
6. Check the fluid level with the dipstick. Add more fluid if needed.
7. Replace the fluid drain knob (1) and tighten securely.
8. Lower the log splitter.
Hydraulic fluid
- Use an AW32 hydraulic fluid for operation over 40°F.
- Dexron® automatic transmission fluid for operation below 40°F.
Note: Do not mix AW32 hydraulic fluid with Dexron® automatic transmission fluid.
Sharpen the splitting wedge
After a period of use, the splitting wedge may need to be sharpened. Use a fine-toothed file or
rasp to remove burrs or to refresh crushed areas.