Spectra Precision ProMark 700 User Guide - Manual (Page 6)

English
2
ProMark 700 Packout
Standard
Accessories
The ProMark 700 packout consists of the following items:
• [1]: ProMark 700 GNSS receiver
• [2]: Universal AC/DC adapter shipped with four different
types of input connectors.
• [3]: Power cable extension (male jack to 6-pin connector)
• [4]: Vehicle power cable (cigarette lighter connector type
to female jack)
• [5]: Soft transport bag.
Optional
Accessories
Cable Kit P/N 91865-00 (see picture).
This kit is used to establish a USB connection between the
ProMark 700 and a computer. This connection is required for
upgrading the GNSS firmware when the computer has no
Bluetooth.
Because the process takes 15-20 minutes, the ProMark 700
should always be connected to external power when updating
firmware.
The optional cable kit therefore consists of:
• A V-shaped cable terminated with a DB9-f connector. One
of its other ends is fitted with a female jack, for
connection to a power source, and the other with a 6-pin
circular connector for connection to the ProMark 700.
• A short cable extension (USB to DB9-m), to be used
between the computer (USB port) and the V-shaped cable
(SubD-9m).
[1]
[2]
[3]
[4]
[5]