ShelterLogic 26764 18 x 40 Super Max Canopy - Manual (Page 3)

7. Twist Tite
8. Attaching &
Securing base
Feet
7.1
T o get your cover to fit
snugly over the frame, "twist"
each corner leg pole equally
until the cover becomes very
tight. (picture A). Make sure
to line up the hole in the top
of the leg with the hole in the
corner side bends.
7.2 Picture B To keep the leg
Insert Base Feet Plates onto
bottom of legs, be sure to line
up the pre-drilled hole in the leg
with the pre-drilled hole in the
base foot. Insert long pins all
the way through leg and foot,
to other side, secure with ring.
B
6. Securing Cover
Working inside, under-neath the unit, begin with the corners.
Insert the cord of the bungee-ball through the grommet and
around the Cross Pole, then around the ball. By doing
this from the inside it will hide the bungee-ball and give a cle-
aner look. When all 4 corners are secured, work from side to
side to get an even fit.
PAGE 3
5. Securing Legs
Short Pins are used to secure legs to
side bend connectors.
TM
in place, wrap the bungee cord
around the cross rail, insert "S"
hook into lined up hole of leg
pole and 3 way connector. Do
this for each corner.