Audiovox PRESTIGE PMC-50 - Manual (Page 4)

WIRED COMMANDER OPERATION
1
LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel will illuminate when the CD
changer is operating. The disc number, track number and elapsed time
or Disc ID name (if programmed) will appear as well as the function in use
as explained in the applicable function description in this section.
2
PLAY/PAUSE SELECTOR ( / )
Pressing this button turns on the CD changer, illuminates the display
panel and begins play of the first disc if a new magazine has been loaded
into the changer. If a magazine was already in the changer, play will
resume from the point on the track of the disc previously in play.
Pressing the button again will temporarily stop play of the disc and the
“PAUSE” indication will appear on the display panel. Press the button
again to resume play of the disc from the point at which it was stopped.
3
POWER OFF SWITCH (OFF)
Press this button to turn the CD changer off and return to normal FM radio
reception.
3
4
DISC SELECT ( - DISC + )
This button is used to select the desired disc for play. To advance to a
higher number disc, press the “+” side of the button. To return to a lower
number disc, press the “-” side of the button. The number of the disc in
play will be shown on the display panel.
5
TRACK SELECT ( TRACK )
This button is used to quickly select the beginning of a particular track.
With each momentary tap of the Forward Track Select side of the button
(
), the next higher track number will be selected as shown on the
display panel. Similarly, with each momentary tap of the Backward Track
Select side of the button (
), the next lower track number will be
selected.
6
CUE/REVIEW FUNCTIONS
High-speed audible search to any section of the disc can be made by the
Cue and Review functions. Press and hold the Cue side of the button
(
) to advance rapidly in the forward direction or the Review side of
the button ( ) to advance rapidly in the backward direction. During
either function, the elapsed time within each track will automatically be
shown on the display panel.
7
TRACK/DISC REPEAT (RPT)
When the Repeat button is pressed, the “RPT” indication will appear on
the display panel and play of the selected track will be continually
repeated until the Track Repeat mode is cancelled by pressing the
Repeat button again (“RPT” will disappear from the display panel).
When the Repeat button is pressed and held longer than 2 seconds, the
DISC and “RPT” indications will appear on the display panel and play of
the selected disc will be continually repeated. The Disc Repeat mode can
be cancelled by pressing the Repeat button again (
DISC and “RPT” will
disappear from the display panel).
When the Shuffle button
8
is pressed during Disc Repeat mode, the