PreSonus StudioLive 24.4.2 - Manual (Page 49)

45
4 Controls
4.4 Aux and FX Buses
StudioLive™ 24.4.2/16.4.2
Owner’s Manual
FX Level Control. Adjusts the Master Level of the Effects-Send Mix.
This knob controls the overall output level of the internal effects mix.
Internal Effects Bus Select Button. Enables Fat Channel Viewing.
As described in section 4.1.1, the Select button routes its effects bus through
the Fat Channel, allowing you to add dynamics processing and EQ. From
the Fat Channel, you can also route each effects bus to the subgroups or
mains. By default, both FXA and FXB are routed to the Main bus.
Mix Button. Enables Aux Bus Mixing and Metering in the Fat Channel.
When this button is enabled, the 24/16 encoders in the Fat Channel become
the FX-send level controls for each of their respective input channels.
The meters will display the send level of each of the input channels.
4.4.3 Aux and FX Bus Channel Sends
In addition to setting the dynamics for each channel and bus and
metering each channel and output, the Fat Channel also allows you to
create aux mixes and quickly view the send level for each channel.
The Mix and Mix|Pan buttons for each aux and both FX buses are used
for just this purpose. Each one of these buttons allow you to view
and set the send level for each channel to that aux or FX mix.
Mix Button. Enables Aux Bus Mixing in the Fat Channel.
When the Mix button is pressed once, the 24/16 encoder knobs in the Fat Channel
become the aux-send level controls for each of their respective input channels. The
meters will display the send amount for each of the input channels.
Aux Flip Mode. Enables Aux Send
Level Control for Main FireWire Return,
Tape In, Aux Ins A and B, FXA, FXB, and
Talkback (StudioLive 24.4.2 only).
Pressing the Mix button a second time will
switch the first seven meters and encoders
to become the aux-send level controls for
the Main FireWire Return, Analog Tape In,
Aux Input A, Aux Input B, the output of FXA
and FXB, and the Talkback mic (Talkback is
only available for the StudioLive 24.4.2).
While in this mode, the Mix button will remain illuminated, and an LED
in the top and bottom half of meters 8-24/16 will also illuminate.
Press the Mix button a third time to disengage Aux Mix mode.
Mix|Pan Button. Enables Pan Control and Metering in the Fat Channel (Stereo Send
Mode Only).
When two auxes are stereo-linked, and the Mix button is enabled on the even-
numbered aux bus (2, 4, 6, etc.), the Fat Channel encoders become the pan controls
for their respective input channels. The meters will display the pan setting of each of
the input channels. When the Mix button is enabled on the odd-numbered aux bus
(1, 3, 5, etc.), the Fat Channel encoders are send controls for their respective channels.
Press the Mix|Pan button a second time to disengage Aux Mix Pan mode.
For more information on stereo linking, please review Section 4.1.4.
Pan control is not available for the additional buses accessed by Aux Flip Mode.