Innotech Systems SpitFIRE III User Manual
Page 13
Version 1.0
Preliminary
13
Brand Auto-Search
The Spitfire can filter its auto-search by category and brand. For example, it can be told to search
only for Sony TVs. This reduces the time it takes to find the desired code. To start a brand
search the following button sequence is sent…
Function
Status returned
Send a Slot button
1 indicator LED flash
Send PROGRAM
2 LED flashes
Send brand code tens digit 1 LED flash
Send brand code ones digit 1 LED flash
Send SEARCH
AutoSearch
See the brand code list in appendix B.
Brand auto-search is stopped the same way as the category auto-search. Send the PROGRAM
button or one of the 6 slot buttons to save the code, or any other button to abort.
Learning from another remote
The Spitfire can learn IR codes from other remote controls. These learned codes can be
programmed on existing buttons or they can be learned onto unused buttons. If a learned code is
programmed on top of an existing library button, the learned code has precedence. Up to 112
learned codes can be programmed into the Spitfire distributed in any way amongst the 6 source
slots. Note that re-programming a device from the library will erase all the learned codes for that
device slot. The button sequence to learn an IR code is..
Function
Status returned
Send a Slot button
1 indicator LED flash
Send LEARN
Learn Started
Not a learnable button
Memory Full
No button specified
Send any learnable button code
Learn Started 1 flash
No IR detected
No IR detected
Learn analysis error
Memory Full
Holding the teaching remote about 2 inches from the
IR/LEARN LED on the front of the spitfire. Press the
button that you want to learn on the teaching remote for
about 2 seconds or until one of the following status
messages is received.
Learn Complete (2 flashes)
You can only learn IR codes onto the 64 buttons that send IR. You cannot learn IR codes onto
the following buttons that are used for device programming purposes.
•
The 6 slot buttons. (TV, DVD CBL/SAT, AUDIO, VCR, AUX)
•
PROGRAM
•
LEARN
•
F1 – F4 (MAC buttons)
•
SMART-SOURCE
•
SEARCH