IEI Integration HDC-502E_SDK_Windows - Manual (Page 7)

HDC-502E SDK (Windows)
Page 7
1.1 Overview
A CD is shipped with the video capture card. The CD contains a driver for the video
capture controllers on the card. When the video capture card is installed on the system,
the driver must be installed. Failure to install the driver means that that video capture card
cannot be detected by the system.
NOTE:
The Found New Hardware Wizard will automatically start when the
system detects the video capture card. Click Cancel to exit the wizard
and follow the steps described in this chapter to install the driver and
the HDCapture SDK.
NOTE:
To be able to install the driver and the HDCapture SDK in a 64-bit
operating system (such as Windows 7), please do the followings:
1. When the system is booting, press F8 to enter the Advanced Boot
Options menu. Choose “Disable Driver Signature Enforcement”
and press Enter.
2. Login the system as “administrator” and start to install the driver
and application.