IEI Integration AFL-4 series-N270 v1.05 - Manual (Page 35)

AFL-4 Series-N270 User Manual
Page 35
2.7.2 Power Adapter
The AFL-4 Series-N270 is shipped with a 90 V to 264 V AC power adapter. The adapters
shipped with the AFL-408A/B and AFL-W410 has a maximum power output of 40 W.
The AFL-412A power adapter has a maximum output of 48 W. The AFL-415A/AE power
adapters have a maximum of 60 W. The power adapter has a 12 V DC output connector.
2.7.3 Power Connector
There is one 12 V DC-IN center-pin power input connector and one DC-IN terminal block
power input connector on the bottom panel. The power connector is shown in Figure 2-10
below.
Figure 2-10: Power Connector
2.8 Wireless Connections
The following section describes the wireless modules on the circuit.
2.8.1 USB Bluetooth Module
An integrated Bluetooth module (not available on the AFL-408B and AFL-W410A) is
connected to ICH7 chipset through the USB bus. The AFL-4 Series-N270 Bluetooth
module enables wireless communications between the AFL-4 Series-N270 and various
peripheral devices through a Bluetooth network. The peripheral devices may include:
Headsets
Barcode readers
PDA
Printers
Cell phones
Keyboard and mouse