Aga Ranges SIX-FOUR DC6 - Manual (Page 17)

5. Fit the pan supports in the following order The pan supports are marked on the underside to
correspond to the markings below. The pan supports must locate in the recesses in the
hotplate casting. (See Fig. 8A & 8B)
17
Important
It is very important for the performance and reliability of the hob that the pan supports are fitted
in accordance with the AGA SIX-FOUR SERIES - DC6 OWNERS MANUAL.
To help identify the correct location of the pan supports, the centre rear pan support has been
uniquely designed with a tag, as shown. This pan support must be fitted in the rear centre
position with the tag pointing towards the back of the appliance.
Fig. 8B DESN 512995 A
Fig. 8A DESN 513712 A