204e electric power transfer hinge, Application, Technical data – Southern Folger LOCK MOUNTINGS User Manual
Page 6
FOR MORE INFORMATION, PLEASE CALL 210-533-1231
Revised
12/10
APPLICATION:
Designed to supply power from
door frames to electric locks on
hollow metal doors, the 204E
Power Transfer Hinge contains
five completely concealed and
tamperproof Teflon
™
-coated
conductors. Available in full
mortise configuration only to be
used with
three 204FMSS
institutional hinges. This is not a
load-bearing hinge.
TECHNICAL DATA:
•
STANDARD FINISH: US26D
•
SIZE: 4-1/2” x 4-1/2” x 3/16”
•
WEIGHT: 1.6 lbs.
•
HINGE LEAVES: Investment
cast brass
•
HINGE PIN: 5/8” diameter
O.D. tubing steel
•
ELECTRICAL: 1 amp
capacity, 40 volts maximum
204E ELECTRIC POWER
TRANSFER HINGE
A C C E S S O R I E S
INSTITUTIONAL
HINGES
F5
090604SouthernFolger_final:INSIDE 8/21/09 5:22 PM Page 95
This manual is related to the following products:
- 10105K KEY 10105R FOOT BOLT RECEPTACLE 10105 HEAD OR FOOT BOLT 900 SERIES KEYSWITCHES 900 SERIES MOMENTARY PUSHBUTTON 590 HINGED ACCESS DOOR 262 FOOD PASS 240CPS CONCEALED POSITION SWITCH 220A DOOR POSITION SWITCH 200MRS MAGNETIC SWITCH 219 CYLINDER SHIELD 218 ESCUTCHEON 215C KNOB PULL 214S RECESSED DOOR PULL 212C RAISED DOOR PULL 204E ELECTRIC POWER TRANSFER HINGE 205 HINGE 204FMSS FULL MORTISE HINGE 203FP F00D PASS HINGE 203FS FULL SURFACE HINGE HIGH SECURITY SIX-PIN MOGUL CYLINDER AND KEY PARACENTRIC CYLINDER AND KEY